Generator Settings for Workstation Configuration:
WS1: Tube 1, Bucky 1, AEC 0
WS2: Tube 1, Direct, AEC 0
All others: Tube 0
3TS1 - Jumper needed from 2-7, 5-6 for exposure
SW2 bit 3 changed for service mode
New EEPROM can be left on service mode. Old cannot.
WS1: Tube 1, Bucky 1, AEC 0
WS2: Tube 1, Direct, AEC 0
All others: Tube 0
3TS1 - Jumper needed from 2-7, 5-6 for exposure
SW2 bit 3 changed for service mode
New EEPROM can be left on service mode. Old cannot.